NCL Website header
NCL Home > Documentation > Graphics > Graphical Interfaces

gsn_csm_streamline_contour_map_ce

Creates and draws streamlines over a contour plot over a cylindrical equidistant map.

Prototype

load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/gsn_code.ncl"  ; These two libraries are automatically
load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/gsn_csm.ncl"   ; loaded from NCL V6.2.0 onward.
                                                          ; No need for user to explicitly load.

	function gsn_csm_streamline_contour_map_ce (
		wks     [1] : graphic,  
		u    [*][*] : numeric,  
		v    [*][*] : numeric,  
		data [*][*] : numeric,  
		res     [1] : logical   
	)

	return_val [1] :  graphic

Arguments

wks

A Workstation identifier. The identifier is one returned either from calling gsn_open_wks or calling create to create a Workstation object.

u
v

The u and v data for the streamline plot; they must be two-dimensional.

data

The data for the contour plot. It must be two-dimensional, where the leftmost dimension will be represented on the Y (latitude) axis, and the rightmost dimension represented on the X (longitude) axis.

res

A variable containing an optional list of plot resources, attached as attributes. Set to True if you want the attached attributes to be applied, and False if you either don't have any resources to set, or you don't want the resources applied.

Return value

A scalar id of the map plot created is returned. The id of the streamline plot is returned as an attribute called streamline and the id of the contour plot as an attribute called contour. The id of the data object is returned as an attribute called vfdata, and the id of the scalar data object is returned as an attribute called sfdata. This is useful if you want to use setvalues to change some data options after this function has been called.

Description

This function creates and draws streamlines over a contour plot over a cylindrical equidistant map on the given workstation.

In order for the streamlines and contours to be overlaid correctly on the map, please see the document "Overlaying data on a map".

The map will be centered at longitude 0 unless you set the resource mpCenterLonF to the desired center longitude.

The special resource gsnAddCyclic will be set to True so that a cyclic point will be added to the data. Set this resource to False if your data is not cyclic, or if you have already added the cyclic point in another fashion.

If u, v, or data have a _FillValue attribute, these values will be used as missing values.

For the contour plot, if the resource cnFillOn is set to True, then the following will happen automatically:

  • a labelbar will be automatically added (default horizontal)
  • contour lines and line labels will be turned off
  • the contour information label will be turned off
If you want to turn the labelbar off, set lbLabelBarOn to False.

For the map, the following will happen automatically:

  • the continents will be colored gray
  • the continental outlines will be turned off
  • the latitude/longitude locations will be labeled
  • the tickmarks will point outward

If u has an attribute called "long_name", and gsnLeftString hasn't explicitly been set, then the value of this attribute is used for the left string title.

If u has an attribute called "units", and gsnRightString hasn't explicitly been set, then the value of this attribute is used for the right string title.

To maximize the area that the plot is drawn in, set the special resource gsnMaximize to True.

In NCL V6.1.0, this function was updated to automatically create a labelbar if stMonoLineColor is set to False.

See Also

gsn_csm_streamline, gsn_csm_streamline_scalar, gsn_csm_streamline_contour_map, gsn_csm_streamline_contour_map_polar, gsn_csm_streamline_map, gsn_csm_streamline_scalar_map, gsn_csm_streamline_scalar_map_polar, gsn_csm_streamline_map_polar, gsn_streamline, gsn_streamline_scalar, gsn_streamline_scalar_map, gsn_streamline_map, gsn_csm_pres_hgt_streamline


Special gsn resources

Examples

load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/gsn_code.ncl"   
load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/gsn_csm.ncl"   

begin
;
; Read in 2D data only
;
  uvf = addfile("$NCARG_ROOT/lib/ncarg/data/cdf/941110_UV.cdf","r")
  pf  = addfile("$NCARG_ROOT/lib/ncarg/data/cdf/941110_P.cdf","r")
  u   = uvf->u
  v   = uvf->v
  p   = pf->Psl

  wks  = gsn_open_wks("ncgm","gsn_csm_streamline_contour_map_ce2")
  gsn_define_colormap(wks,"temp1")

  res                        = True                           ; plot mods desired
  res@gsnMaximize            = True

  res@sfXCEndV               = max(p&lon)
  res@sfXCStartV             = min(p&lon)
  res@sfYCEndV               = max(p&lat)
  res@sfYCStartV             = min(p&lat)
  res@vfXCEndV               = max(u&lon)
  res@vfXCStartV             = min(u&lon)
  res@vfYCEndV               = max(u&lat)
  res@vfYCStartV             = min(u&lat)

  res@cnFillOn               = True

  res@mpPerimOn              = False
  res@mpFillOn               = True
  res@mpLabelsOn             = False

  res@mpGeophysicalLineColor = 2
  res@mpGridLineColor        = 2
  res@mpLimbLineColor        = 2

  res@mpLimitMode            = "LatLon"
  res@mpMinLatF              = 0.0
  res@mpMinLonF              = 0.0

  res@mpFillDrawOrder        = "Predraw"
  res@mpGridAndLimbDrawOrder = "Draw"
  res@mpOutlineDrawOrder     = "Draw"

  res@tiMainString           = "Example of a streamline plot"

  plot = gsn_csm_streamline_contour_map_ce(wks,u,v,p,res)
end

For some application examples, see: